Nissan Note Clutch Housing Bearing Removal and Installation
Four simple steps to remove the clutch housing bearing on the Nissan Note.
- Cut the base of the deflector plastic hollow needle located at the centre of the bearing. Drive out the cup using a puller.
- Fit a new deflector, then the bearing race using a 55 mm (2.17in) diameter tube.
- Remove the input shaft bearing guide using the press and a 38mm (1.50 in) diameter tube.
- Refit the bearing guide using the press and tool B. Vi. 1601.
If you require any further help with your Nissan Note, consider downloading the official repair manual from the link below. In conclusion, this instantly downloadable software based eManual can be view on near all operating systems, tablets or phones. In summary there is thousands of pictures, text and illustrations that will help you with servicing, repairs or troubleshooting. Above all, by downloading this manual it will give you piece of mind for help with future problems.
LINK : Nissan Note Repair Manual