Every vehicle irrespective of its make and model will have windshields fitted in the front and the back part. Since the early 1900s, windshield construction seems to have changed with time. During the initial days, it was constructed using a single glass pane. However, it was regarded to be dangerous and impractical. Manufacturers experimented and came up with laminated auto glass.
Laminated auto glass
This type was found to be much stronger as well as impact resistant. It was good enough to protect the driver and passengers from flying debris like small rocks, leaves, and bugs. But in some unfortunate accidents, chances were high of the driver and passenger’s head penetrating the glass. Even larger objects caused damage.
Other problems with laminated glass
Flying rocks can chip as well as crack the laminated windshield, thus requiring complete replacement. The reason is crack and chip repair back then was not in vogue. During the mid-1960s, further experiments helped in the development of a ‘High Penetration Resistant’ (HPR) windshield. These were tested and became the standard fitting for all vehicles.
Lamination film development
With time, lamination film improved significantly, thus serving two purposes. Lamination film helped increase windshield strength, held itself to rock impacts, and did not allow large objects to penetrate it. Thus, on impact, there was less cracking. It is then that the windshield repair era began! In several decades, windshield repair improved significantly. But where repair is not possible, Kia ev6 windshield replacement is necessary.
Improved techniques
Qualified technicians can now use enhanced repair techniques, resins, and equipment for filling up the gaps. Once the repair is done, the glass can retain its structural integrity. But then you have searched for an agency that has employed repairing experts who have a better understanding of the process and advanced techniques. They should seal the windshield chip or crack perfectly.
Repair the first solution
The truth is that about 98% of auto windshield rock cracks and chips can be effectively repaired. Thus issues arising with sun glare and visual distraction are eliminated completely, thereby offering the driver a clear view of the road ahead. In case repair leaves some mark on the surface, especially on the driver’s part you need to get it replaced fully. Kia ev6 windshield replacement cost is quite affordable.
Importance of timely repairing
What happens if cracks or chips are not repaired on time after the impact? These cracks are only likely to spread further thus making repairing it much more difficult. Repairing it on time will mean saving a good amount of money. Small repairs can be done very quickly and within minutes. You just need to visit a reputed auto glass repair shop.
Modern windshield repair
Repairing windshield cracks and chips has become easy and effective these days. The modern techniques used by the specialists help determine the break type that has occurred. It includes star-burst, half-moon, star-break, etc. If cracks are found, then the professional evaluates its length. If the crack is found to be too big and repair will not provide the necessary solution, they will suggest replacement.
The process involved windshield repair
- Once the area to repair is identified, the windshield is heated to approximately 215 degrees Fahrenheit. The purpose is to remove moisture if any present in the cracked area or rock chip.
- Equipment is used to inject resin into the damaged area with precise pressure. Excessive pressure applied will only crack the windshield further beyond repair. Again not putting enough air and pressure will not help remove or displace cracks or chips.
- Trapped air is to be removed. Otherwise, it will only expand further at the newly sealed place while expanding the crack externally. The professionals will take great care and use their knowledge to get smooth results.
- Next air is vacuumed from the break by applying a precise vacuum amount. An excessive vacuum will only result in the injected resin getting removed from the crack or chip. Again, not sufficient air will not allow resin removal while allowing the flowing in of resin.
- The last spate involves curing UV light-activated It cures completely, thereby bonding auto glass. At the same time, it retains the windshield’s structural integrity and visual appearance.
Repair/replacement
You can get your vehicle’s cracked or chip windshield repaired by an expert. But if you use your vehicle quite frequently, then you are suggested to get a new replacement. This way, you can have peace of mind and satisfaction.