This is a simple step by step tutorial on how to replace the handbrake cable on the Vauxhall Vivaro van. For more information on this procedure please follow the link at the bottom of this article.
Removal of Hand Brake Cable
- Loosen the adjusting nut of the hand brake cables.
- Unclip the hand brake control lever gaiter.
- Disconnect the hand brake switch connector (1) .
- Unclip the hand brake cable (2).
- Remove the parking brake cable connecting shaft ( Exploded View Fig 1.2 ) .
- Remove the hand brake cables ( Exploded View Fig 1.2 ) .
Installation of Hand Brake Cable
- Proceed in the reverse order to removal.
Fig 1.1
Fig 1.2
- Hand brake lever.
- Hand brake primary cable.
- Hand brake primary cable connecting shaft.
- Hand brake cable.
- Hand hooks.
- Hand brake secondary cable.
- Bolt.
- Hand brake secondary cable support.
- Retaining hooks.
- Retaining hooks.
- Spacer.
- Adjustment nut.
- Hand brake secondary cable.
- Hand brake compensator.
- Hand brake secondary cable support.
- Bolt.
For more information on repairing, servicing and troubleshooting the Vauxhall Vivaro van consider downloading our fully comprehensive repair manual, this manual has over 2000 pages of know how to get your Vivaro back on the road. For more details on this manual click this link or the download button below ( Vauxhall Vivaro Workshop Manual ).
Other Related Articles : Check Injection Vauxhall Vivaro